Can we leave the covers on natural stone for the full build?

Yes - provided you use a breathable cover designed for stone. Solid plastic films can trap moisture against porous stone and cause staining or darkening, particularly on marble, travertine and limestone. Lift sections to inspect after wet trades and grouting.

Will the protection adhesive mark our polished marble?

Adhesive should never be in direct contact with polished stone. Use a breathable cover sized to the area with edge taping onto adjacent surfaces (e.g. skirting or substrate), not onto the stone face itself.

What about large-format tile? Anything different to standard tile?

Large-format tile is more prone to corner chips during the follow-on trades because the corners carry more leverage. Use corner guards on exposed edges and a rigid board cover in high-traffic paths rather than film alone.

Do you deliver to Melbourne sites?

Yes. Melbourne is a metro freight zone - typically 1–2 business days from order. Local pickup may be available, confirm at quote.

Tile and Marble Protection in Melbourne

Tile and Marble Protection - Melbourne

Protecting natural stone and large-format tile on Melbourne's premium residential and commercial fitouts is non-negotiable. From the first delivery on site through to handover, the wrong cover or the wrong adhesive can mark polished marble, stain porous stone, or chip an exposed edge - and rework on imported stone is rarely cheap or quick. Honcho supplies the breathable covers, edge profiles and corner guards Melbourne builders use to keep tile and marble defect-free across long programs.

Melbourne context

Melbourne projects often run long, multi-trade programs across heritage terraces, prestige renovations and commercial fit-outs. Original features sit alongside new stone, timber and glass, leaving finishes exposed to trades for months, so consistent surface protection through the build is essential to a clean handover.

Tile and Marble guidance

Natural stone and large-format tile are protected differently to engineered floors. Use breathable covers (not solid plastic films) on natural stone so moisture isn't trapped against the surface - trapped moisture is what causes staining, efflorescence and darkening on marble, travertine and limestone. Avoid any adhesive in direct contact with polished surfaces, adhesive residue can mark and is awkward to remove without damaging the polish. Use dedicated edge profiles and corner guards on exposed stone edges through the wet trades phase, and lift covers to inspect after grouting so moisture from the grout cure isn't held against the stone.

Recommended for tile and marble in Melbourne

Temporary Adhesive Mats - Skudo & Honcho Construction Tack Mats

Our temporary surface protection adhesive mats are perfect for commercial and residential jobs, tiles, benchtops and marble from foot traffic, stains and ladders.

With a specialised adhesive solution, the mats are temporarily adhered to surfaces for up to 12 months without leaving residue.

Learn more

Skudo HT Commercial System

Provides comprehensive temporary tile and stone protection from stains, scratches and construction damage lasting up to 12 months.

Composed of a two-part system, which includes a Non-Toxic base Base Coat and Polyester Matting, our protection is applied directly to the surface and removed on completion of the job leaving a clean residue free surface. Ideal for external jobs.

Learn more